Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Ghost Gun - 3D Printed 9mm Carbine!

GarnetPild

Legendary
Founder
Joined
Dec 2, 2020
Messages
3,914
tenor.gif


tenor.gif
 

Edgehollow

Elite
Founder
Member
Joined
Jan 10, 2021
Messages
747

JerBearr

Moderator
Moderator
Joined
Jan 15, 2021
Messages
547
Yes. All the pressure is in the upper, so there's no stress on the lower parts. Slap a 9mm Upper on the shown product and you're ready to rock and roll.
My upper shown in the picture is actually 3d printed as well. You can make a barrel from a "blast proof" pipe and add rifling to it via a process called "ECM"

The in home manufactured barreling prove to be nearly as effective and accurate as factory manufactured barrels.
 

GarnetPild

Legendary
Founder
Joined
Dec 2, 2020
Messages
3,914
I have about 80% of the parts printed. You can purchase parts kits for the metal bits, but I am going to manufacture my own barrel/firing pin, harvest my springs from ball point pens, etc...

Dude, I was pretty impressed with your initial post, being a gun and somewhat a tech nerd...but making your own barrel?! That is awesome!
 
Top Bottom