[NSFW] do I have a dirty mind or........I swear it's a buffer tube

[JerBearr]

 

[CumAllahHerAss]

You see what you want to see, OP.

 

[GarnetPild]

It looks like a robot dildo, maybe? If robots used such things.

 

[BurntJ]

It looks like a robot dildo, maybe? If robots used such things.

This seems to be a good question for @ThreadBot

 

[shiv]

 

[tiderollsonu]

OP got an avatar so I will read his threads now

Spoiler

 

[Cre8ive]

View attachment 19251

One of your VERY BEST Croot-Overlord. Keep up the nasty rebuttal work you are doing. Your thinning out the herd. Keeping the blood line pure.

 

[BurntJ]

View attachment 19251

Where are the other 1/2 of this legends trophies?

Probably stored with his Bag of Dicks!?!

 

[Rebarcock.]

View attachment 19166View attachment 19167

Is that your 3d printer? I would love to see one of those. I love CMC machines.
Automation is one of the things i love to just sit and watch it work. Nice dildo too weirdo

 

[JerBearr]

Is that your 3d printer? I would love to see one of those. I love CMC machines.
Automation is one of the things i love to just sit and watch it work. Nice dildo too weirdo

Yes this one is mine! I have a camera hooked up to it so I can monitor it remotely, but the camera I am using does not have remote access capabilities. I will be upgrading the camera sometime in the next couple of months and I will be able to live stream the feed here on Crootn!

 

[Rebarcock.]

Yes this one is mine! I have a camera hooked up to it so I can monitor it remotely, but the camera I am using does not have remote access capabilities. I will be upgrading the camera sometime in the next couple of months and I will be able to live stream the feed here on Crootn!

How close are you to Bham? I saw one run maybe 15 yrs ago at a concrete and steel trade show. I bet i watched for a hour. Technology is so much better now. What kinda widgets you fabricating?

 

[JerBearr]

How close are you to Bham? I saw one run maybe 15 yrs ago at a concrete and steel trade show. I bet i watched for a hour. Technology is so much better now. What kinda widgets you fabricating?

I think about 1.5 hours maybe? Not sure exactly! Yeah 3d printing has been around for awhile, but the fact that it is now so small, high resolution, and can fit in residential homes is what is so impressive about it.

I am without a doubt more of a "function print" kind of person. I love designing models in CAD, so there are things I will model and decide need to be reworked. Look at this thread and you'll see the custom cabinet locks I made so my cat cannot open my kitchen cabinets anymore. This thread shows the FGC-9 I am creating. This part of FSF is where we will be updating the FSF 3D printed collectibles, figures, merch, etc...

As for things I've designed myself:

• Custom Cabinet Locks
• Custom Computer Desk Grommets
• Custom Stand for Gaming Headset
• Custom Camera Mount for 3D Printer to Monitor Prints Remotely
• Custom Dash Camera Mount for BMW Z4
• 3D Printed Modern Hexagonal Wall Art
• Custom Sized Spacers
• Cat Genie Mod 1
• Cat Genie Mod 2
• Cat Genie Mod 3
• Cat Genie Mod 4
• Cat Genie Mod 5
• Cat Genie Mod 6 (Not For Sale Yet)
• FGC-9 9mm Carbine
• etc.. etc..

I just make things I find interesting. I'm sure Im forgetting quite a bit. I have some large scale projects I intend to work on as well. I'm going to make molds for carbon fiber trim panels for my car. Im going to replicate the 1960s PEZ Shooter. I have more ideas for modern art (home decor). Im sure Im forgetting things as well. A lot of projects just take time because much of what I do is fully custom designed by me so it takes design iteration.

 

[shiv]

I think about 1.5 hours maybe? Not sure exactly! Yeah 3d printing has been around for awhile, but the fact that it is now so small, high resolution, and can fit in residential homes is what is so impressive about it.

I am without a doubt more of a "function print" kind of person. I love designing models in CAD, so there are things I will model and decide need to be reworked. Look at this thread and you'll see the custom cabinet locks I made so my cat cannot open my kitchen cabinets anymore. This thread shows the FGC-9 I am creating. This part of FSF is where we will be updating the FSF 3D printed collectibles, figures, merch, etc...

As for things I've designed myself:

• Custom Cabinet Locks
• Custom Computer Desk Grommets
• Custom Stand for Gaming Headset
• Custom Camera Mount for 3D Printer to Monitor Prints Remotely
• Custom Dash Camera Mount for BMW Z4
• 3D Printed Modern Hexagonal Wall Art
• Cat Genie Mod 1
• Cat Genie Mod 2
• Cat Genie Mod 3
• Cat Genie Mod 4
• Cat Genie Mod 5
• Cat Genie Mod 6 (Not For Sale Yet)
• FGC-9 9mm Carbine
• etc.. etc..

I just make things I find interesting. I'm sure Im forgetting quite a bit. I have some large scale projects I intend to work on as well. I'm going to make molds for carbon fiber trim panels for my car. Im going to replicate the 1960s PEZ Shooter. I have more ideas for modern art (home decor). Im sure Im forgetting things as well. A lot of projects just take time because much of what I do is fully custom designed by me so it takes design iteration.

I need you to help me print a gear for a little plastic robot I got for the girls that broke.

 

[JerBearr]

I need you to help me print a gear for a little plastic robot I got for the girls that broke.

Whenever you give me the gear Ill do it!

 

[Rebarcock.]

I think about 1.5 hours maybe? Not sure exactly! Yeah 3d printing has been around for awhile, but the fact that it is now so small, high resolution, and can fit in residential homes is what is so impressive about it.

I am without a doubt more of a "function print" kind of person. I love designing models in CAD, so there are things I will model and decide need to be reworked. Look at this thread and you'll see the custom cabinet locks I made so my cat cannot open my kitchen cabinets anymore. This thread shows the FGC-9 I am creating. This part of FSF is where we will be updating the FSF 3D printed collectibles, figures, merch, etc...

As for things I've designed myself:

• Custom Cabinet Locks
• Custom Computer Desk Grommets
• Custom Stand for Gaming Headset
• Custom Camera Mount for 3D Printer to Monitor Prints Remotely
• Custom Dash Camera Mount for BMW Z4
• 3D Printed Modern Hexagonal Wall Art
• Cat Genie Mod 1
• Cat Genie Mod 2
• Cat Genie Mod 3
• Cat Genie Mod 4
• Cat Genie Mod 5
• Cat Genie Mod 6 (Not For Sale Yet)
• FGC-9 9mm Carbine
• etc.. etc..

I just make things I find interesting. I'm sure Im forgetting quite a bit. I have some large scale projects I intend to work on as well. I'm going to make molds for carbon fiber trim panels for my car. Im going to replicate the 1960s PEZ Shooter. I have more ideas for modern art (home decor). Im sure Im forgetting things as well. A lot of projects just take time because much of what I do is fully custom designed by me so it takes design iteration.

All i got out of that is you make cat locks in beta control group A and you also have GenMod tapes 1-5.

Have you ever been part of the illuminato?
They are a Peruvian flute group from the lower West side of the mountain.

But really i think about scaling up stuff. Well i used to. Now I m going to gold and circling wagons